Comparison of bromodeoxyuridine immunoassay with tritiated thymidine radioassay for measuring bacterial productivity in oceanic waters     

Koji Hamasaki 《Journal of Oceanography》2006,62(6):793-799

Recently, bromodeoxyuridine (BrdU) has been successfully applied to the measurement of bacterial productivity as an alternative to tritiated thymidine (³H-TdR), which is widely used but often restricted by regulations, particularly in field settings. Here, I report improvements to existing BrdU methods to simplify procedures and increase sensitivity. The feasibility of the method was tested measuring bacterial production in low-productive waters. The method provided radioisotope-free measurements of bacterial production rates at shorter (∼1 h) on-board processing time of samples than previously reported procedures. It was applicable to the detection of rates ranging from 0.021 to 2.7 pmol BrdU l⁻¹h⁻¹. BrdU incorporation rates measured by immunoassay showed a statistically significant correlation with ³H-TdR incorporation rates measured by radioassay (r = 0.74, n = 24, p < 0.001). The linear regression obtained (BrdU = 0.80[³H-TdR] − 0.016) showed a similar relationship to previously reported regressions (BrdU = 0.65[³H-TdR] + 0.12, [³H-BrdU] = 0.69[³H-TdR] − 0.81). There were no statistically significant differences among these regression lines. These results suggest that the method described here provides a non-radioisotopic productivity measurement of bacteria in oceanic epipelagic waters, while retaining continuity of the data with other existing ³H-TdR and BrdU methods.  相似文献   

A shipborne wave-recording system with digital data processing     

Keisuke Taira  Atsushi Takeda  Koji Ishikawa 《Journal of Oceanography》1971,27(4):175-186

A shipborne wave-recording system which consists of a sonic wave gauge, accelerometers, gyroscopes and a computer system is described. Signals from the measuring apparatus are fed directly into a shipborne digital computer system at a prescribed sampling rate. The time series of wave heights and the acceleration are transformed into Fourier series using an algorithm of Fast Fourier Transform. Errors contained in the observed wave heights due to ship motion are corrected in the Fourier series by using the Fourier coefficients for the vertical acceleration. Power spectra and waveforms can also be calculated in a short time with this system from Fourier coefficients. Examples of the observational results obtained in the central part of the East China Sea in 1969 are presented.  相似文献   

A laboratory experiment to monitor the contact state of a fault by transmission waves   总被引：1，自引：0，他引：1  

Naoto Yoshioka  Koji Iwasa 《Tectonophysics》2006,413(3-4):221-238

We performed a series of laboratory experiments in which elastic waves were transmitted across a simulated fault. Two types of experiments were carried out: (1) Normal Stress Holding Test (NSHT): normal stress was kept constant for about 3 h without shear stress and transmission waves were observed. (2) Shear Stress Increasing Test (SSIT): shear stress was gradually increased until a stick-slip event occurred. Transmission waves were continuously observed throughout the process of stress accumulation. We focused on the change in transmission waves during the application of shear stress and especially during precursory slips.It was found in NSHT that the amplitude of transmission waves linearly increased with the logarithm of stationary contact time. The increase amounted to a few percent after about 3 h. Creep at asperity contacts is responsible for this phenomenon. From a theoretical consideration, it was concluded that the real contact area increased with the logarithm of stationary contact time.We observed in SSIT a significant increase in wave amplitude with shear stress application. This phenomenon cannot be attributed to the time effect observed in NSHT. Instead, it can be explained by the mechanism of “junction growth” proposed by Tabor. Junction growth yields an increase in real contact area. It is required for junction growth to occur that the material in contact is already plastic under a purely normal loading condition. A computer simulation confirmed that this requirement was satisfied in our experiments. We also found that the rate at which the amplitude increased was slightly reduced prior to a stick-slip event. The onset time of the reduction well coincides with the onset of precursory slip. The cause of the reduction is attributed to the reset of stationary contact time due to displacement. This interpretation is supported by the result of NSHT. Taking the time of stationary contact in SSIT into account, we may expect the change in wave amplitude to be, at most, only a few percent. The observed slight reduction in increasing rate is, in this sense, reasonable. The static stiffness of the fault also decreases with precursory slip. It was also found that low frequency waves are a better indicator of precursory slip than high frequency waves. This might suggest that low frequency waves with longer wavelength are a better indicator of average behavior of faults. The problem, however, merits a further investigation. The shifts in phase were also found to be a good indicator of the change in contact state of the fault. The changes in both amplitude and phase of transmission waves are unifyingly understood through the theory of transmission coefficient presented by Pyrak-Nolte et al. Rough surfaces have a tendency to give larger stick-slips than smooth surfaces. The amount of precursory slip is larger for rough surfaces than for smooth surfaces. Although it was confirmed by a computer simulation that rough surfaces have larger contact diameters than smooth surfaces, the rigorous relationship between the surface roughness (contact diameter) and the amount of precursory slips was not established.  相似文献   

Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation     

Koji Fujima 《Natural Hazards》2006,39(2):179-193

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.  相似文献   

Internal deformation of Sikhote Alin volcanic belt, far eastern Russia: Paleocene paleomagnetic results     

Yo-ichiro Otofuji  Takaaki Matsuda  Ryo Enami  Koji Uno  Katsuhiko Nishihama  Li Su  Ruslan G. Kulinich  Petr S. Zimin  Anatoly P. Matunin  Vladimir G. Sakhno 《Tectonophysics》2002,350(3)

We present paleomagnetic results of Paleocene welded tuffs of the 53–50 Ma Bogopol Group from the northern region (46°N, 137°E) of the Sikhote Alin volcanic belt. Characteristic paleomagnetic directions with high unblocking temperature components above 560 °C were isolated from all the sites. A tilt-corrected mean paleomagnetic direction from the northern region is D=345.8°, I=49.9°, α₉₅=14.6° (N=9). The reliability of the magnetization is ascertained through the presence of normal and reversed polarities. The mean paleomagnetic direction from the northern region of the Sikhote Alin volcanic belt reflects a counterclockwise rotation of 29° from the Paleocene mean paleomagnetic direction expected from its southern region. The counterclockwise rotation of 25° is suggested from the paleomagnetic data of the Kisin Group that underlies the Bogopol Group. These results establish that internal tectonic deformation occurred within the Sikhote Alin volcanic belt over the past 50 Ma. The northern region from 44.6° to 46.0°N in the Sikhote Alin volcanic belt was subjected to counterclockwise rotational motion through 29±17° with respect to the southern region. The tectonic rotation of the northern region is ascribable to relative motion between the Zhuravlevka terrane and the Olginsk–Taukhinsk terranes that compose the basements of the Sikhote Alin volcanic belt.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Lithology and palynology of Neogene sediments on the narrow edge of the Kitakami Massif (basement rocks), northeast Japan: Significant change for depositional environments as a result of plate tectonics     

Koji Yagishita  Akiko Obuse  Hiroshi Kurita 《Island Arc》2003,12(3):268-280

Abstract A controversial stratigraphic section, the Taneichi Formation, is exposed along the Pacific Coast of northeastern Honshu, the main island of the Japanese Archipelago. Although most sediments of the formation have long been dated as late Cretaceous, the northern section of it has been assigned to (i) the Upper Cretaceous; (ii) the Paleogene; or (iii) the Neogene. In the present report, we present the data of palynological and sedimentological studies, showing that the northern section should be assigned to the Neogene. A more important point in the present study is that we invoke some basic principles of fluvial sedimentology to resolve this stratigraphic subject. The lignite layers full of Paleogene–Miocene dinoflagellate cysts and pollen assemblages drape over the boulder‐sized (>40 cm in diameter) clasts in the northern section. However, the layers totally consist of aggregates of small lignite chips, indicating that the lignites are allochthonous materials. The mega‐clasts with derived microfossils in the lignites are thought to have been deposited as Neogene fluvial (flood) sediments in the newly formed Japanese Archipelago. Prior to the Miocene, the northern Honshu was part of the Eurasian Plate, thus the boulder‐sized clasts cannot be envisaged as long river flood deposits along the continental Paleogene Pacific Coast. Instead, the mega‐clasts with the draping lignites were probably derived from nearby Miocene highlands in the newly born island arc.  相似文献   

Spatial probabilistic modeling of slope failure using an integrated GIS Monte Carlo simulation approach   总被引：4，自引：0，他引：4  

G. Zhou  T. Esaki  Y. Mitani  M. Xie  J. Mori 《Engineering Geology》2003,68(3-4):373-386

Spatial probabilistic modeling of slope failure using a combined Geographic Information System (GIS), infinite-slope stability model and Monte Carlo simulation approach is proposed and applied in the landslide-prone area of Sasebo city, southern Japan. A digital elevation model (DEM) for the study area has been created at a scale of 1/2500. Calculated results of slope angle and slope aspect derived from the DEM are discussed. Through the spatial interpolation of the identified stream network, the thickness distribution of the colluvium above Tertiary strata is determined with precision. Finally, by integrating an infinite-slope stability model and Monte Carlo simulation with GIS, and applying spatial processing, a slope failure probability distribution map is obtained for the case of both low and high water levels.  相似文献   

Polymetallic Mineralization at the Suttsu Vein-type Deposit, Southwestern Hokkaido, Japan   总被引：1，自引：0，他引：1  

Shuji Ono  Koji Hirai    Hiroharu Matsueda  Taro Kabashima 《Resource Geology》2004,54(4):453-464

Abstract. The Suttsu polymetallic vein-type deposit, hosted by tuff, tuff breccia and shale of the Miocene Kunnui Formation and propylitized hornblende-augite andesite, is located in southwestern Hokkaido, Japan. It has been exploited and explored for Cu, Pb, Zn and Ag until 1962.
In this study, we examined K-Ar ages, ore mineralogical characteristics and fluid inclusions to obtain new data for the deposit.
The K-Ar ages on sericite indicate that the polymetallic mineralization occurred in Late Miocene (8.1–5.7 Ma). The polymetallic banded ore from the Ohkubo vein is characterized by an abundance of Au, Ag, Sn, Bi, in, Se and Te. These metals are mainly ascribed to electrum (30.3–37.8 atom% Ag), Se-bearing pavonite (8.5–9.5 wt% Se), gustavite-lillianite solid solution, Se-bearing bismuthinite (5.0–5.3 wt% Se), kawazulite, cassiterite, Sn-bearing chalcopyrite (3.3–4.2 wt% Sn), In-bearing stannite, stannite-chalcopyrite solid solution, and In- and Sn-bearing sphalerite (2.6–8.4 wt% In and 1.8–4.3 wt% Sn), occurring in narrow bands of the ore. The In- and Sn-bearing sphalerite likely forms a sphalerite-roquesite-stannite solid solution with the contents of roquesite and stannite being about 2–9 and 2-A mole%, respectively. Temperatures and salinities (in wt% NaCl equiv.) of the ore fluids are estimated to be 180-250C and 3–4 wt%, respectively. The Sn-bearing chalcopyrite therefore probably precipitated metastably. The geologic and mineralogical features suggest that pre-Tertiary basement rocks rich in organic material underlie the Miocene Kunnui Formation nearby the deposit and that they contributed to local and temporary reduction of magnetite-series magmas favorable for the early stage tin-polymetallic mineralization.  相似文献   

Tectonic elements with South China affinity in the Korean Peninsula: new Early Jurassic palaeomagnetic data   总被引：1，自引：0，他引：1  

Koji Uno  Tae Woo Chang  Kuniyuki Furukawa 《Geophysical Journal International》2004,158(2):446-456

  相似文献